AUIPS6031RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 46mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | AUIPS6031R |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.8A |
| Power Supplies | 6/28V |
| Voltage | 36.3V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Current | 16A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 2.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 20μs |
| Fall Time (Typ) | 30 μs |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 16A |
| Rds On (Typ) | 46m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 2.39mm |
| Length | 6.73mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AUIPS6031RTRL Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in TO-252-5, DPak (4 Leads + Tab), TO-252AD.Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.The lighting driver has Auto Restart features.The AUIPS6031R family contains this object.A total of 4 terminations can be found in it.5 pins are used for operation.Currently, the lighting driver has a total of 1 functions.The maximum output current is reduced to 2.8A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 14V.This lighting driver is mounted in the way of Surface Mount.There is 46mOhm resistance on the LED driver.It is part of the Automotive, AEC-Q100 series.In this case, the output current is set to 2.8A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This part is powered by 6/28V.
AUIPS6031RTRL Features
Supplied from 14V
Resistance of 46mOhm
AUIPS6031RTRL Applications
There are a lot of Infineon Technologies AUIPS6031RTRL Power Switches ICs applications.
- Smartphone and PDA
- Set-Top Boxes
- Solid State Drivers
- Solid-State Drives
- Hot Swap
- Set-top-box
- HDD, SSD
- PDAs
- USB Power Distribution
- Wireless/Networking Cards
