Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
Number of Pins |
5 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2012 |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - with Nickel (Ni) barrier |
Subcategory |
Peripheral Drivers |
Power Rating |
3.1W |
Max Power Dissipation |
3.1W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
14V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AUIPS6031S |
JESD-30 Code |
R-PSSO-G4 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
3.1A |
Power Supplies |
6/28V |
Voltage |
36.3V |
Interface |
On/Off |
Nominal Supply Current |
2.2mA |
Current |
16A |
Output Configuration |
High Side |
Power Dissipation |
3.1W |
Output Current |
3.1A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
-300mV |
Max Input Voltage |
5.5V |
Rise Time |
20μs |
Fall Time (Typ) |
30 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature |
Output Peak Current Limit-Nom |
16A |
Rds On (Typ) |
46m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
4.83mm |
Length |
10.67mm |
Width |
11.33mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
AUIPS6031S Overview
It's?packaged?in?the way?of?a?Tube.Package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB contains it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.The lighting driver has Auto Restart features.There is a AUIPS6031S family of things that it belongs to.The termination count is 4.For operation, 5 pins are used.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 3.1A.The supply voltage of 14V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.This electrical component can be found in the Automotive, AEC-Q100 series.As a result, the output current is set to 3.1A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this case, the power supply is 6/28V.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of -300mV volts for this LED driver.
AUIPS6031S Features
Supplied from 14V
AUIPS6031S Applications
There are a lot of Infineon Technologies AUIPS6031S Power Switches ICs applications.
- Portable Devices
- Telecom and Network Systems
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- Storage Drives
- Hot Swaps
- Wireless/Networking Cards
- Portable Video Game Players
- Hot Swap
- Various applications equipped with buttons