Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
Number of Pins |
5 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
ECCN Code |
EAR99 |
Resistance |
46mOhm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
25W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
14V |
Base Part Number |
AUIPS6031S |
JESD-30 Code |
R-PSSO-G4 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
3.1A |
Supply Voltage-Max (Vsup) |
28V |
Power Supplies |
6/28V |
Supply Voltage-Min (Vsup) |
6V |
Interface |
On/Off |
Nominal Supply Current |
2.2mA |
Output Configuration |
High Side |
Power Dissipation |
25W |
Output Current |
3.1A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
25 μs |
Switch Type |
General Purpose |
Rise Time |
5μs |
Fall Time (Typ) |
9 μs |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
45 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
36V Max |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature |
Load Current |
550mA |
Output Peak Current Limit-Nom |
16A |
Rds On (Typ) |
46m Ω |
Drain to Source Resistance |
60mOhm |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
AUIPS6031STRL Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Auto Restart features available on the LED driving board.It is a member of the AUIPS6031S family.It contains 4 terminations.In order to operate, the 5 pins are used.The LED driver has 1 functions.In order to meet the operation criteria, the maximum output current drops to 3.1A.Supply voltages of 14V allow for high efficiency.It is positioned in the direction of Surface Mount.In this LED driving board, there is 46mOhm resistance.The Automotive, AEC-Q100 series includes this electrical component.In this case, the output current will be set to 3.1A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The maximum supply voltage for this LED driver is 28V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.This part's power supply is 6/28V.
AUIPS6031STRL Features
Supplied from 14V
Resistance of 46mOhm
AUIPS6031STRL Applications
There are a lot of Infineon Technologies AUIPS6031STRL Power Switches ICs applications.
- Solid State Drivers
- Storage (HDDs, SSDs)
- PC Cards
- Set-Top Boxes
- Set-top-box
- Handheld Devices
- USB Power Distribution
- Notebook PC
- Wireless Modem Data Cards
- Notebook and Tablet Computers