AUIPS6041
| Parameters | |
|---|---|
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | AUIPS6041 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 6/28V |
| Voltage | 36.3V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Current | 7A |
| Output Configuration | High Side |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 10μs |
| Fall Time (Typ) | 10 μs |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 110m Ω |
| Turn Off Time | 20 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 16.51mm |
| Length | 10.67mm |
| Width | 4.83mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
AUIPS6041 Overview
As a result, it is packaged in the form of a Tube.In the TO-220-5 package, it is included.The lighting driver has the mounting type Through Hole.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Auto Restart features in order for it to be useful.It is a member of the AUIPS6041 family.As a result, there are 5 terminations.The operation is carried out using the 5 pins.The LED driving board has a total of 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 14V.It is positioned in the direction of Through Hole.These electrical components are part of the Automotive, AEC-Q100 series.When this case is used, the output current is set to 4A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part is powered by 6/28V.
AUIPS6041 Features
Supplied from 14V
AUIPS6041 Applications
There are a lot of Infineon Technologies AUIPS6041 Power Switches ICs applications.
- PC Card Hot Swap
- Handheld Devices
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Hot Swaps
- Portable Devices
- PDAs
- Hot-Swap Systems
- HDD, SSD
- Notebook and Tablet Computers
