AUIPS6041GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Power Rating | 1.25W |
| Max Power Dissipation | 1.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 7A |
| Base Part Number | AUIPS6041G |
| Number of Outputs | 1 |
| Output Voltage | 39V |
| Output Type | N-Channel |
| Max Output Current | 1.6A |
| Voltage | 36.3V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Current | 7A |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 μs |
| Switch Type | General Purpose |
| Min Input Voltage | -300mV |
| Clamping Voltage | 39V |
| Max Input Voltage | 5.5V |
| Rise Time | 3μs |
| Drain to Source Voltage (Vdss) | 39V |
| Fall Time (Typ) | 3 μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 110m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 130MOhm |
| Turn Off Time | 20 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS6041GTR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It has a total of Auto Restart features.It is part of the AUIPS6041G family of LED drivers.In total, there are 8 terminations.In order to operate, the 8 pins are used.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 1.6A to meet the operation criteria.With a supply voltage of 14V, high efficiency is possible.Surface Mount is mounted in the way of this LED driving board.The LED driver has 110mOhm resistance.It is part of the Automotive, AEC-Q100 series.This case results in a 1.6A output current.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum input voltage is 5.5V volts.A minimum input voltage of -300mV volts is required for this LED driver.
AUIPS6041GTR Features
Supplied from 14V
Resistance of 110mOhm
AUIPS6041GTR Applications
There are a lot of Infineon Technologies AUIPS6041GTR Power Switches ICs applications.
- USB Power Distribution
- HDD, SSD
- USB Ports/Hubs
- Smartphone and PDA
- HDD and SSD
- Telecom and Network Systems
- Solid-State Drives
- Storage Drives
- USB3.1 Power Delivery
- Hot Swap
