AUIPS6041R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 7A |
| Base Part Number | AUIPS6041R |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.3A |
| Power Supplies | 6/28V |
| Voltage | 36.3V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Current | 7A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | -300mV |
| Clamping Voltage | 39V |
| Max Input Voltage | 5.5V |
| Rise Time | 10μs |
| Fall Time (Typ) | 10 μs |
| Nominal Input Voltage | 5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 110m Ω |
| Turn Off Time | 20 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 2.39mm |
| Length | 6.73mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS6041R Overview
It is package in Tube case.There is a TO-252-5, DPak (4 Leads + Tab), TO-252AD package that includes it.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Auto Restart.The AUIPS6041R family consists of this type.A total of 4 terminations can be found in it.During operation, the 5 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 2.3A to meet the operation criteria.As long as the supply voltage is 14V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.110mOhm resistance is present in the lighting driver.It is part of the Automotive, AEC-Q100 series.As a result, the output current is set to 2.3A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.6/28V is the power supply of the part.Input voltage is limited to 5.5V volts.There is a minimum input voltage of -300mV volts for this LED driver.
AUIPS6041R Features
Supplied from 14V
Resistance of 110mOhm
AUIPS6041R Applications
There are a lot of Infineon Technologies AUIPS6041R Power Switches ICs applications.
- Various applications equipped with buttons
- USB Protection
- Hot Swap
- Hot-Swap Systems
- Handheld Devices
- Solid State Drivers
- Wearable Devices
- USB Ports/Hubs
- Set-top-box
- Portable/Handheld Devices
