AUIPS6041S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS6041S |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 6/28V |
| Voltage | 36.3V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Current | 7A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 10μs |
| Fall Time (Typ) | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 110m Ω |
| Turn Off Time | 20 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 4.83mm |
| Length | 10.67mm |
| Width | 11.33mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS6041S Overview
It is package in Tube case.There is a TO-252-5, DPak (4 Leads + Tab), TO-252AD package that includes it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has Auto Restart features.It comes under the family of AUIPS6041S.A total of 5 terminations have been found in it.During operation, the 5 pins are used.It contains 1 functions.Supply voltages of 14V allow for high efficiency.The lighting driver is mounted in the way of Surface Mount.Electrical components such as this are included in the Automotive, AEC-Q100 series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.It has a power supply of 6/28V.
AUIPS6041S Features
Supplied from 14V
AUIPS6041S Applications
There are a lot of Infineon Technologies AUIPS6041S Power Switches ICs applications.
- PC Card Hot Swap
- Smart Phones, Feature Phones
- Hard Disk Drives
- Set-Top Boxes
- Hot-Swap Systems
- USB Ports/Hubs
- Handheld Devices
- Hot Swap
- Portable Video Game Players
- Wearable Devices
