AUIPS6041STRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS6041S |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 6/28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 10μs |
| Fall Time (Typ) | 10 μs |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 110m Ω |
| Turn Off Time | 20 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SINK |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS6041STRL Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package TO-252-5, DPak (4 Leads + Tab), TO-252AD.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.It is a member of the AUIPS6041S family.As a result, there are 5 terminations.In order to operate, the 5 pins are used.It consists of 1 functions.Using a voltage of 14V allows for high efficiency.There is 110mOhm resistance on the LED driver.This electrical component can be found in the Automotive, AEC-Q100 series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The maximum supply voltage for this LED driver is 28V (Vsup).Normal operation requires Vsup above 6V.There is a voltage supply of 6/28V volts on this part.
AUIPS6041STRL Features
Supplied from 14V
Resistance of 110mOhm
AUIPS6041STRL Applications
There are a lot of Infineon Technologies AUIPS6041STRL Power Switches ICs applications.
- HDD, SSD
- Storage Drives
- Hot Swaps
- Low Voltage I/O System Power
- PC Card Hot Swap
- HDD and SSD
- PDAs
- Mobile Communication Devices
- Portable Music Players
- USB3.1 Power Delivery
