AUIPS6044GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 2.214806g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.8W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IPS6044GPBF |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Voltage | 28V |
| Interface | On/Off |
| Operating Supply Current | 9μA |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 3.8W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 4A |
| Rise Time | 10μs |
| Fall Time (Typ) | 30 μs |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Number of Drivers | 4 |
| Rds On (Typ) | 110m Ω |
| Drain to Source Resistance | 130mOhm |
| Height | 2.35mm |
| Length | 18.1mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS6044GTR Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the 28-SOIC (0.295, 7.50mm Width) package.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver has a total of 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Auto Restart.There is a IPS6044GPBF family of things that it belongs to.It has a total of 28 terminations.In order to operate, the 28 pins are used.This operation requires the maximum output current to be decreased to 7A.Surface Mount is mounted in the way.110mOhm resistance is present in the lighting driver.This case has the output current set to 1.5A.It is self-contained in an econtainer with a capacity of Peripheral Drivers.There are 4 drivers available for this part.
AUIPS6044GTR Features
Resistance of 110mOhm
AUIPS6044GTR Applications
There are a lot of Infineon Technologies AUIPS6044GTR Power Switches ICs applications.
- HDD, SSD
- Wireless Modem Data Cards
- USB3.1 Power Delivery
- Hot Swap
- Various applications equipped with buttons
- USB Protection
- Gaming
- Portable Devices
- Hard Disk Drives
- Wearable Devices
