AUIPS6121R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Supply Voltage-Min (Vsup) | 5.8V |
| Interface | On/Off |
| Current - Output (Max) | 12A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.8V~35V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 4.8m Ω |
| Turn Off Time | 250 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.39mm |
| Length | 6.54mm |
| Width | 6.095mm |
| RoHS Status | RoHS Compliant |
AUIPS6121R Overview
It is packaged in the form of a Tube.The TO-252-5, DPak (4 Leads + Tab), TO-252AD package contains it.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.By default, it is set to output 1.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts on this LED driver.As a result, there are 4 terminations.The LED driving board has a total of 1 functions.This lighting driver is capable of delivering a maximum output of 12A volts.High efficiency is possible when the supply voltage is set to 6V.In this case, Vsup (maximum supply voltage) is set to 35V.Normal operation requires Vsup above 5.8V.
AUIPS6121R Features
Supplied from 6V
AUIPS6121R Applications
There are a lot of Infineon Technologies AUIPS6121R Power Switches ICs applications.
- Various applications equipped with buttons
- Hard Disk Drives
- USB3.1 Power Delivery
- Handheld Devices
- Low Voltage I/O System Power
- Set-Top Boxes
- Set-top-box
- Gaming
- Hot-Swap Systems
- Smart Phones, Feature Phones
