AUIPS7081
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | IPS7081PBF |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 2.5mA |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 4mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 2.3A |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 55m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS7081 Overview
It is package in Tube case.It's included in the TO-220-5 package.Mounting type Through Hole is selected for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It is equipped with Auto Restart features.I believe it belongs to the IPS7081PBF family.A total of 5 terminations have been found in it.In order to operate, 5 pins are used.It is important to note that the LED driving board has 1 functions.The lighting driver's maximum output is 2AV.This results in the maximum output current dropping to 9A to meet the operation criteria.Using a voltage of 14V allows for high efficiency.The LED driving board is mounted in the way of Through Hole.Currently, the LED driving board has a resistance of 55mOhm ohms.This electrical component can be found in the Automotive, AEC-Q100 series.This case results in a 2.3A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.It is recommended to set the supply voltage to 35V for optimum efficiency.It operates at a maximum current of 4mA.
AUIPS7081 Features
Supplied from 14V
Resistance of 55mOhm
AUIPS7081 Applications
There are a lot of Infineon Technologies AUIPS7081 Power Switches ICs applications.
- Telecom and Network Systems
- Low Voltage I/O System Power
- Portable Music Players
- HDD and SSD
- Hot Swap
- Set-top-box
- PC Card Hot Swap
- Set-Top Boxes
- Solid State Drivers
- Mobile Communication Devices
