AUIPS7081RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Weight | 260.39037mg |
| Manufacturer Package Identifier | AUIPS7081RTRL |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | IPS7081PBF |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 2.5mA |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 16 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 2.3A |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 25 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 55m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| On-State Resistance | 70mOhm |
| Height | 2.52mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS7081RTRL Overview
The LED driver's packaged as a Tape & Reel (TR).The TO-252-5, DPak (4 Leads + Tab), TO-252AD package includes it.It has been mounted as Surface Mount on the LED driver.The switch type is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.The IPS7081PBF family contains this object.A total of 4 terminations can be found in it.For operation, we use the 5 pins.The LED driving board has a total of 1 functions.In terms of output, the lighting driver can provide a maximum of 2A V.It is necessary to reduce the maximum output current to 9A to meet the operation criteria.The supply voltage of 14V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.In this case, there is 55mOhm resistance in the LED driving board.It belongs to the Automotive, AEC-Q100 series.When this case is used, the output current is set to 2.3A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.
AUIPS7081RTRL Features
Supplied from 14V
Resistance of 55mOhm
AUIPS7081RTRL Applications
There are a lot of Infineon Technologies AUIPS7081RTRL Power Switches ICs applications.
- USB Ports/Hubs
- Notebook PC
- USB3.1 Power Delivery
- Portable Video Game Players
- Wireless Headsets
- Storage Drives
- Hot Swap
- Hot Swap
- Solid-State Drives
- PC Card Hot Swap
