AUIPS7081S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IPS7081PBF |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 2.3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Turn On Time | 45 µs |
| Rds On (Typ) | 55m Ω |
| Turn Off Time | 50 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.83mm |
| RoHS Status | RoHS Compliant |
AUIPS7081S Overview
As you can see, it's packaged in the way of a Tube.It is included with the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package as well.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Auto Restart features in order for it to be useful.It belongs to the family IPS7081PBF.A total of 4 terminations can be found in it.The LED driver has 1 functions.This LED driver has a maximum output of 2.3AV.It is possible to achieve a high level of efficiency with a supply voltage of 14V.This electrical component can be found in the Automotive, AEC-Q100 series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.A maximum supply voltage of 35V is set in Vsup.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 6V.
AUIPS7081S Features
Supplied from 14V
AUIPS7081S Applications
There are a lot of Infineon Technologies AUIPS7081S Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- Hot-Swap Systems
- Telecom and Network Systems
- Wireless Modem Data Cards
- Handheld Devices
- Hard Disk Drives
- USB Power Distribution
- Portable Video Game Players
- Wearable Devices
