AUIPS7081STRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 55mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | IPS7081PBF |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 2.5mA |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 4mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 2.3A |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 55m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 4.83mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS7081STRL Overview
It is package in Tape & Reel (TR) case.It's included in the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Auto Restart.There is a IPS7081PBF family of things that it belongs to.It consists of 4 terminations in total.The operation is performed through the 5 pins.It contains 1 functions.This lighting driver is capable of delivering a maximum output of 2A volts.To comply with the operation criteria, the maximum output current is reduced to 9A.The supply voltage can be 14V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.Currently, the LED driving board has a resistance of 55mOhm ohms.This electrical component is included in the Automotive, AEC-Q100 series.The output current is set to 2.3A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The supply voltage should be set at 35V for best efficiency.There is a maximum current requirement of 4mA for its operation.
AUIPS7081STRL Features
Supplied from 14V
Resistance of 55mOhm
AUIPS7081STRL Applications
There are a lot of Infineon Technologies AUIPS7081STRL Power Switches ICs applications.
- Low Voltage I/O System Power
- Wireless Headsets
- Notebook PC
- Hot Swaps
- USB3.1 Power Delivery
- USB Power Distribution
- Notebook and Tablet Computers
- Solid State Drivers
- PC Cards
- Hot Swap
