AUIPS7091GTR
| Parameters | |
|---|---|
| Clamping Voltage | 70V |
| Output Current per Channel | 1.5A |
| Rise Time | 7μs |
| Fall Time (Typ) | 6 μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Turn On Time | 35 μs |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 80m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 45 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IPS7091PBF |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 35.3V |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 4mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 12 μs |
| Switch Type | General Purpose |
Description
A five-terminal Intelligent Power Switch (IPS), the AUIPS7091GTR has built-in protection against short circuits, overheating, ESD, inductive loads, and diagnostic feedback. At the Ilim value, the output current is constrained. Up until the heat protection kicks in, the current limiter is activated. If the junction temperature rises above Tshutdown, the over-temperature protection shuts down the gadget. The junction will automatically resume once it has cooled to 7°C below Tshutdown. For status feedback of short circuits, over-temperature, and open load detection, a diagnostic pin is included. Large offsets between the logic ground and the load are possible thanks to the double-level shifter circuitry.
Features
Logic ground isolated from power ground
ESD protection
Ground loss protection
Status feedback
Over temperature shutdown (with auto-restart)
Short circuit protection (current limit)
Active clamp
Open load detection
Applications
Automotive
Commercial
Construction
Agricultural vehicles
Electronic control units (ECU)
