AUIPS7091S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.25W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | IPS7091PBF |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 2.5mA |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 4mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 1.5A |
| Turn-Off Delay Time | 45 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS7091S Overview
The LED driver's packaged as a Tube.In the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package, it is included.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.Auto Restart features are available on the lighting driver.It comes under the family of IPS7091PBF.It contains 4 terminations.During operation, the 5 pins are used.It is important to note that the LED driving board has 1 functions.As a result, the maximum output current is reduced to 5A in order to meet the operation requirements.The supply voltage of 14V is conducive to high efficiency.This lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 80mOhm ohms.This electrical component is part of the Automotive, AEC-Q100 series.This results in a 1.5A output current.It is self-contained in an econtainer with a capacity of Peripheral Drivers.For maximum efficiency, the supply voltage should be set to 35V.For its operation, a current of 4mA is required.
AUIPS7091S Features
Supplied from 14V
Resistance of 80mOhm
AUIPS7091S Applications
There are a lot of Infineon Technologies AUIPS7091S Power Switches ICs applications.
- HDD and SSD
- Hot Swap
- Set-top-box
- Notebook and Tablet Computers
- Solid-State Drives
- Portable Video Game Players
- Hot-Swap Systems
- Wearable Devices
- PC Card Hot Swap
- Hot Swaps
