AUIPS7091STRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | IPS7091PBF |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 2.5mA |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.5A |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 5A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS7091STRL Overview
It is package in Tape & Reel (TR) case.The TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package contains it.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has Auto Restart features.It belongs to the IPS7091PBF family.There are 4 terminations in it.5 pins are used for operation.There are 1 functions of the LED driver.This LED driver has a maximum output of 2AV.This operation requires the maximum output current to be decreased to 5A.High efficiency is possible at 14V supply voltage.It is positioned in the direction of Surface Mount.80mOhm resistance is present in the lighting driver.It belongs to the Automotive, AEC-Q100 series.This case results in a 1.5A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 6V.
AUIPS7091STRL Features
Supplied from 14V
Resistance of 80mOhm
AUIPS7091STRL Applications
There are a lot of Infineon Technologies AUIPS7091STRL Power Switches ICs applications.
- Wireless/Networking Cards
- Portable Devices
- Wearable Devices
- PC Card Hot Swap
- Portable GPS
- USB Ports/Hubs
- HDD and SSD
- Smart Phones, Feature Phones
- Hot Swap
- Storage (HDDs, SSDs)
