banner_page

AUIPS7111STRL

N-Channel PMIC Automotive, AEC-Q100 Series AUIPS7111S 5 Pin 28V TO-263-5, D2Pak (4 Leads + Tab), TO-263BB


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIPS7111STRL
  • Package: TO-263-5, D2Pak (4 Leads + Tab), TO-263BB
  • Datasheet: PDF
  • Stock: 129
  • Description: N-Channel PMIC Automotive, AEC-Q100 Series AUIPS7111S 5 Pin 28V TO-263-5, D2Pak (4 Leads + Tab), TO-263BB (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-263-5, D2Pak (4 Leads + Tab), TO-263BB
Number of Pins 5
Manufacturer Package Identifier PG-TO263-5-2
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2010
Series Automotive, AEC-Q100
JESD-609 Code e3
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 6mOhm
Terminal Finish Matte Tin (Sn) - with Nickel (Ni) barrier
Power Rating 2.5W
Max Power Dissipation 2.5W
Terminal Position SINGLE
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 28V
Current Rating 10A
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AUIPS7111S
JESD-30 Code R-PSSO-G4
Number of Outputs 1
Output Type N-Channel
Max Output Current 10A
Operating Supply Voltage 50V
Voltage 50V
Interface On/Off
Current 10A
Output Configuration High Side
Power Dissipation 2.5W
Output Current 10A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Clamping Voltage 65V
Output Current per Channel 10A
Nominal Input Voltage 50V
Output Polarity INVERTED
Ratio - Input:Output 1:1
Voltage - Load 8V~50V
Fault Protection Current Limiting (Fixed), Over Temperature
Rds On (Typ) 6m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Height 4.826mm
Length 10.668mm
Width 9.65mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

AUIPS7111STRL Overview


It is package in Tape & Reel (TR) case.It is included in the package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.I believe it belongs to the AUIPS7111S family.The termination count is 4.It is necessary to use the 5 pins in order to operate the LED driver.There are 1 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 10A.High efficiency is possible when the supply voltage is set to 28V.The lighting driver is mounted in the way of Surface Mount.In this LED driving board, there is 6mOhm resistance.This electrical component can be found in the Automotive, AEC-Q100 series.As a result, the output current is set to 10A.When using this LED driving board, it is recommended that the supply voltage is set to 50V.

AUIPS7111STRL Features


Supplied from 28V
Resistance of 6mOhm

AUIPS7111STRL Applications


There are a lot of Infineon Technologies AUIPS7111STRL Power Switches ICs applications.

  • Mobile Communication Devices
  • Telecom and Network Systems
  • Wireless Modem Data Cards
  • Smart Phones, Feature Phones
  • Portable GPS Device
  • Storage Drives
  • Wireless/Networking Cards
  • Notebook PC
  • USB Protection
  • Portable GPS

Write a review

Note: HTML is not translated!
    Bad           Good