AUIPS7121RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 24mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Supply Voltage | 28V |
| Base Part Number | AUIPS7121R |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 60A |
| Operating Supply Voltage | 60V |
| Power Supplies | 28V |
| Voltage | 60V |
| Interface | On/Off |
| Current | 3.8A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 3.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 60V |
| Output Current per Channel | 3.8A |
| Nominal Input Voltage | 60V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 24m Ω |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS7121RTRL Overview
It is package in Tape & Reel (TR) case.In the TO-252-5, DPak (4 Leads + Tab), TO-252AD package, it is included.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~150°C to ensure reliable operation.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As you can see, it comes from the AUIPS7121R family.A total of 4 terminations have been found in it.For operation, we use the 5 pins.In order to meet the operation criteria, the maximum output current drops to 60A.High efficiency is possible at 28V supply voltage.In this case, it is mounted in the way of Surface Mount.It has a resistance of 24mOhm.In this case, the output current is set to 3.8A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This part is powered by 28V.In order to optimize the efficiency of the supply voltage, it should be set to 60V.This LED driver can handle voltages up to 60V volts.It requires 6V volts as the minimum input voltage.
AUIPS7121RTRL Features
Supplied from 28V
Resistance of 24mOhm
AUIPS7121RTRL Applications
There are a lot of Infineon Technologies AUIPS7121RTRL Power Switches ICs applications.
- Hard Disk Drives
- Notebook PC
- USB Power Distribution
- Set-top-box
- Portable Video Game Players
- Wireless/Networking Cards
- PC Cards
- Smart Phones, Feature Phones
- Hot Swap
- Various applications equipped with buttons
