AUIPS7125R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AUIPS7125R |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 50V |
| Power Supplies | 28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 3.8A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 30 µs |
| Rds On (Typ) | 24m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.52mm |
| Length | 6.54mm |
| Width | 6.095mm |
| RoHS Status | RoHS Compliant |
AUIPS7125R Overview
It is packaged in the manner of a Tube.It's included in the TO-252-5, DPak (4 Leads + Tab), TO-252AD package.The LED driver is mounted as Surface Mount.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The AUIPS7125R family consists of this type.It has a total of 4 terminations.It contains 1 functions.In terms of output, the lighting driver can provide a maximum of 3.8A V.It is possible to obtain high efficiency with a supply voltage of 28V.These electrical components are part of the Automotive, AEC-Q100 series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The LED driver is configured with a maximum supply voltage of 50V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.This part is powered by 28V.
AUIPS7125R Features
Supplied from 28V
AUIPS7125R Applications
There are a lot of Infineon Technologies AUIPS7125R Power Switches ICs applications.
- Gaming
- Portable GPS Device
- USB Protection
- Solid State Drivers
- Hot Swap
- Portable Devices
- Storage Drives
- Portable/Handheld Devices
- PC Cards
- Hot-Swap Systems
