AUIPS71411G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 75mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 1.25W |
| Max Power Dissipation | 1.25W |
| Base Part Number | AUIPS71411G |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 60V |
| Voltage | 60V |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Number of Inputs | 1 |
| Max Input Voltage | 60V |
| Nominal Input Voltage | 65V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~60V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75mOhm |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
AUIPS71411G Overview
The LED driver's packaged as a Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It belongs to the family AUIPS71411G.The 8 pins are used for the operation of the system.Its maximum output voltage is 1.5AV.To comply with the operation criteria, the maximum output current is reduced to 1.5A.The LED driving board is mounted in the way of Surface Mount.There is 75mOhm resistance on the LED driver.The Automotive, AEC-Q100 series includes this electrical component.When this is the case, the output current is set to 1.5A.For maximum efficiency, the supply voltage should be set to 60V.This LED driving board can accept voltages up to 60V volts as an input.It requires 6V volts as the minimum input voltage.It is suitable for stable operation to operate at a maximum temperature of 150°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.Currently, there are 1 inputs available.
AUIPS71411G Features
Resistance of 75mOhm
AUIPS71411G Applications
There are a lot of Infineon Technologies AUIPS71411G Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Wireless Headsets
- Portable/Handheld Devices
- USB Power Distribution
- USB Ports/Hubs
- Wireless Modem Data Cards
- Gaming
- Set-top-box
- HDD, SSD
- Hot-Swap Systems
