AUIPS7142G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS7142G |
| JESD-30 Code | R-PDSO-G16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 50V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Turn Off Time | 80 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
AUIPS7142G Overview
The LED driver's packaged as a Tube.It is included with the 16-SOIC (0.295, 7.50mm Width) package as well.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 2 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This object belongs to the AUIPS7142G family.The termination count is 16.The LED driving board has a total of 1 functions.This lighting driver is capable of delivering a maximum output of 1.5A volts.Supply voltages of 28V allow for high efficiency.It is included in the Automotive, AEC-Q100 series.The maximum supply voltage for this LED driver is 50V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 6V.
AUIPS7142G Features
Supplied from 28V
AUIPS7142G Applications
There are a lot of Infineon Technologies AUIPS7142G Power Switches ICs applications.
- USB Ports/Hubs
- USB3.1 Power Delivery
- Portable Video Game Players
- Wireless Headsets
- Low Voltage I/O System Power
- Portable Devices
- Various applications equipped with buttons
- Wireless/Networking Cards
- Mobile Communication Devices
- Wearable Devices
