AUIPS71451GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Supply Voltage-Max (Vsup) | 50V |
| Power Supplies | 6/50V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 1.25W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 1.5A |
| Rise Time | 5μs |
| Fall Time (Typ) | 5 μs |
| Nominal Input Voltage | 60V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Rds On (Typ) | 75m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS71451GTR Overview
It is package in Tape & Reel (TR) case.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.There are 8 terminations in it.During operation, the 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 1.5A when operation criteria are met.The supply voltage can be 28V for high efficiency.The LED driving board is mounted in the way of Surface Mount.In this case, there is 100mOhm resistance in the LED driving board.These electrical components are part of the Automotive, AEC-Q100 series.In this case, the output current will be set to 1.5A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this case, Vsup (maximum supply voltage) is set to 50V.In order to operate normally, the supply voltage (Vsup) must remain above 6V.A 6/50V power supply is used by the part.
AUIPS71451GTR Features
Supplied from 28V
Resistance of 100mOhm
AUIPS71451GTR Applications
There are a lot of Infineon Technologies AUIPS71451GTR Power Switches ICs applications.
- Notebook PC
- Hard Disk Drives
- Portable/Handheld Devices
- Portable Devices
- Hot Swaps
- Set-top-box
- USB Power Distribution
- Smartphone and PDA
- Hot-Swap Systems
- Various applications equipped with buttons
