AUIPS72211RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Base Part Number | AUIPS72211R |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 6/60V |
| Voltage | 65.3V |
| Interface | On/Off |
| Nominal Supply Current | 4mA |
| Current | 40A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 20A |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Rise Time | 800ns |
| Fall Time (Typ) | 400 ns |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 30m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 2.39mm |
| Length | 6.73mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS72211RTRL Overview
Tape & Reel (TR) is the way it's packaged.Package TO-252-5, DPak (4 Leads + Tab), TO-252AD contains it.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.It has a maximum output voltage of N-Channel volts.I believe it belongs to the AUIPS72211R family.A total of 4 terminations have been found in it.In order to operate, the 5 pins are used.It consists of 1 functions.A supply voltage of 28V leads to high efficiency.Surface Mount is mounted in the way of this lighting driver.Currently, the LED driving board has 30mOhm resistance.There is an electrical component included in the Automotive, AEC-Q100 series.The output current is set to 20A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The power supply of the part is 6/60V.
AUIPS72211RTRL Features
Supplied from 28V
Resistance of 30mOhm
AUIPS72211RTRL Applications
There are a lot of Infineon Technologies AUIPS72211RTRL Power Switches ICs applications.
- USB Power Distribution
- Portable/Handheld Devices
- Solid-State Drives
- Portable Music Players
- Set-top-box
- Hot-Swap Systems
- HDD, SSD
- Wireless Modem Data Cards
- PC Card Hot Swap
- Smart Phones, Feature Phones
