AUIPS7221R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AUIPS7221R |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 60V |
| Power Supplies | 6/60V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | High Side |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 30m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.52mm |
| Length | 6.54mm |
| Width | 6.095mm |
| RoHS Status | RoHS Compliant |
AUIPS7221R Overview
The LED driver's packaged as a Tube.This file is included in package TO-252-5, DPak (4 Leads + Tab), TO-252AD.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The AUIPS7221R family consists of this type.It has a total of 4 terminations.There are 1 functions of the LED driver.Using a voltage of 28V allows for high efficiency.It belongs to the Automotive, AEC-Q100 series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The LED driver is configured with a maximum supply voltage of 60V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 6V.In this case, the power supply is 6/60V.
AUIPS7221R Features
Supplied from 28V
AUIPS7221R Applications
There are a lot of Infineon Technologies AUIPS7221R Power Switches ICs applications.
- USB Protection
- Telecom and Network Systems
- USB Power Distribution
- Hot Swap
- PDAs
- PC Card Hot Swap
- Wireless Headsets
- Storage (HDDs, SSDs)
- Set-Top Boxes
- Solid-State Drives
