AUIPS7221RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 3mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Base Part Number | AUIPS7221R |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 30A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 6V |
| Nominal Supply Current | 4mA |
| Current | 30A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 10mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 900 ns |
| Switch Type | General Purpose |
| Min Input Voltage | 300mV |
| Max Input Voltage | 5.5V |
| Rise Time | 300ns |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1.2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 30m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 2.52mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AUIPS7221RTRL Overview
A Tape & Reel (TR) is used to package it.Package TO-252-5, DPak (4 Leads + Tab), TO-252AD contains it.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the AUIPS7221R family.The termination count is 4.It is necessary to use the 5 pins in order to operate the LED driver.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 30A.Supply voltages of 28V allow for high efficiency.The lighting driver is mounted in the direction of Surface Mount.3mOhm resistance is present in the lighting driver.It belongs to the Automotive, AEC-Q100 series.This case results in a 10mA output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In order to maximize efficiency, the supply voltage should be set at 5.5V.The maximum input voltage is 5.5V volts.It has a 300mV volt minimum input voltage.There is a maximum supply voltage of 60VV that it is capable of handling.It can operate at 6V volts as well.
AUIPS7221RTRL Features
Supplied from 28V
Resistance of 3mOhm
AUIPS7221RTRL Applications
There are a lot of Infineon Technologies AUIPS7221RTRL Power Switches ICs applications.
- Gaming
- Wireless/Networking Cards
- USB Power Distribution
- Smart Phones, Feature Phones
- PC Card Hot Swap
- Solid State Drivers
- Wearable Devices
- PC Cards
- Hot Swaps
- HDD and SSD
