AUIR3313
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 5.5mOhm |
| Subcategory | Peripheral Drivers |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | AUIR3313 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 23A |
| Power Supplies | 6/26V |
| Voltage | 37V |
| Interface | On/Off |
| Current | 23A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 23A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 23A |
| Nominal Input Voltage | 32V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Turn On Time | 80 μs |
| Rds On (Typ) | 5.5m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 16.51mm |
| Length | 10.67mm |
| Width | 4.83mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIR3313 Overview
It is packaged in the form of a Tube.This package is included in TO-220-5.The LED driver is mounted as Through Hole.General Purpose is the switch type it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has 1 outputs.To operate, it needs a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is a member of the AUIR3313 family.It consists of 5 terminations in total.In order to operate, 5 pins are used.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 23A to meet the operation criteria.As long as the supply voltage is 14V, high efficiency can be achieved.In this case, it is mounted in the way of Through Hole.It has a resistance of 5.5mOhm.This electrical component is included in the Automotive, AEC-Q100 series.When this is the case, the output current is set to 23A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.There is a voltage supply of 6/26V volts on this part.
AUIR3313 Features
Supplied from 14V
Resistance of 5.5mOhm
AUIR3313 Applications
There are a lot of Infineon Technologies AUIR3313 Power Switches ICs applications.
- Portable Devices
- Solid-State Drives
- Low Voltage I/O System Power
- Wireless/Networking Cards
- Gaming
- Hard Disk Drives
- Wireless Modem Data Cards
- Hot-Swap Systems
- Wearable Devices
- PC Cards
