AUIR3313S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIR3313S |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 32V |
| Power Supplies | 6/26V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 23A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Turn On Time | 80 µs |
| Rds On (Typ) | 5.5m Ω |
| Turn Off Time | 200 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.83mm |
| Width | 9.08mm |
| RoHS Status | RoHS Compliant |
AUIR3313S Overview
Tube is how it's packaged.This package is included in TO-263-5, D2Pak (4 Leads + Tab), TO-263BB.In this case, the LED driving board is mounted as Surface Mount.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 1 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts.I believe it belongs to the AUIR3313S family.A total of 4 terminations have been recorded.It is important to note that the LED driving board has 1 functions.The LED driver output is limited to 23AV.It is possible to achieve a high level of efficiency with a supply voltage of 14V.A component of this type is included in the Automotive, AEC-Q100 series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this case, Vsup (maximum supply voltage) is set to 32V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 6V.This part has a power supply of 6/26V.
AUIR3313S Features
Supplied from 14V
AUIR3313S Applications
There are a lot of Infineon Technologies AUIR3313S Power Switches ICs applications.
- Hot-Swap Systems
- HDD, SSD
- PDAs
- Gaming
- Portable Video Game Players
- USB Ports/Hubs
- Hot Swap
- Solid-State Drives
- Solid State Drivers
- Handheld Devices
