Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount, Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-220-5 |
Number of Pins |
5 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2010 |
Series |
Automotive, AEC-Q100 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
9mOhm |
Subcategory |
Peripheral Drivers |
Power Rating |
2W |
Max Power Dissipation |
2W |
Terminal Position |
SINGLE |
Number of Functions |
1 |
Supply Voltage |
14V |
Base Part Number |
AUIR3314 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Power Supplies |
6/26V |
Voltage |
37V |
Interface |
On/Off |
Current |
18A |
Output Configuration |
High Side |
Power Dissipation |
2W |
Output Current |
18A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
55 μs |
Switch Type |
General Purpose |
Output Current per Channel |
5A |
Rise Time |
8μs |
Fall Time (Typ) |
20 μs |
Nominal Input Voltage |
32V |
Turn-Off Delay Time |
140 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
6V~32V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Adjustable), Over Temperature |
Rds On (Typ) |
9m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
Height |
16.51mm |
Length |
10.67mm |
Width |
4.83mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
AUIR3314 Overview
The LED driver's packaged as a Tube.There is a TO-220-5 package that includes it.The LED driver is mounted as Through Hole.There is a General Purpose switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of AUIR3314.A total of 5 terminations have been found in it.In order to operate, 5 pins are used.It is important to note that the LED driving board has 1 functions.It is possible to achieve a high level of efficiency with a supply voltage of 14V.It is positioned in the direction of Surface Mount, Through Hole.Currently, the LED driving board has 9mOhm resistance.It belongs to the Automotive, AEC-Q100 series.This case results in a 18A output current.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part has a power supply of 6/26V.
AUIR3314 Features
Supplied from 14V
Resistance of 9mOhm
AUIR3314 Applications
There are a lot of Infineon Technologies AUIR3314 Power Switches ICs applications.
- Wearable Devices
- Hot Swap
- Wireless/Networking Cards
- USB Protection
- Various applications equipped with buttons
- USB Ports/Hubs
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- Portable GPS
- Hot-Swap Systems