banner_page

AUIR3314S

6/26V N-Channel PMIC Automotive, AEC-Q100 Series AUIR3314S 14V TO-263-5, D2Pak (4 Leads + Tab), TO-263BB


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIR3314S
  • Package: TO-263-5, D2Pak (4 Leads + Tab), TO-263BB
  • Datasheet: PDF
  • Stock: 824
  • Description: 6/26V N-Channel PMIC Automotive, AEC-Q100 Series AUIR3314S 14V TO-263-5, D2Pak (4 Leads + Tab), TO-263BB (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case TO-263-5, D2Pak (4 Leads + Tab), TO-263BB
Surface Mount YES
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2010
Series Automotive, AEC-Q100
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - with Nickel (Ni) barrier
Subcategory Peripheral Drivers
Terminal Position SINGLE
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 14V
Reach Compliance Code compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AUIR3314S
JESD-30 Code R-PSSO-G5
Number of Outputs 1
Qualification Status Not Qualified
Output Type N-Channel
Supply Voltage-Max (Vsup) 32V
Power Supplies 6/26V
Supply Voltage-Min (Vsup) 6V
Interface On/Off
Current - Output (Max) 18A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 6V~32V
Driver Number of Bits 1
Fault Protection Current Limiting (Adjustable), Over Temperature
Turn On Time 55 μs
Rds On (Typ) 9m Ω
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL
Output Current Flow Direction SINK
Height Seated (Max) 4.83mm
Width 9.08mm
RoHS Status RoHS Compliant

AUIR3314S Overview


Tube is how it's packaged.The TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package contains it.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.The AUIR3314S family consists of this type.There are 5 terminations in it.It consists of 1 functions.The LED driver output is limited to 18AV.High efficiency is possible when the supply voltage is set to 14V.It belongs to the Automotive, AEC-Q100 series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The LED driver is configured with a maximum supply voltage of 32V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 6V.This part has a power supply of 6/26V.

AUIR3314S Features


Supplied from 14V

AUIR3314S Applications


There are a lot of Infineon Technologies AUIR3314S Power Switches ICs applications.

  • Portable/Handheld Devices
  • Hot Swaps
  • Wearable Devices
  • Gaming
  • Various applications equipped with buttons
  • Portable GPS Device
  • USB Power Distribution
  • Handheld Devices
  • Portable Video Game Players
  • USB Ports/Hubs

Write a review

Note: HTML is not translated!
    Bad           Good