AUIR3314STRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 9mOhm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIR3314S |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 32V |
| Output Current per Channel | 5A |
| Nominal Input Voltage | 32V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 9m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 4.83mm |
| Length | 10.67mm |
| Width | 11.3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIR3314STRL Overview
Tape & Reel (TR) is the way it's packaged.There is a TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package that includes it.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.There is a AUIR3314S family of things that it belongs to.As a result, there are 5 terminations.The operation is carried out using the 5 pins.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 18A.The supply voltage can be 14V for high efficiency.Surface Mount is mounted in the way.Currently, the LED driving board has 9mOhm resistance.This electrical component can be found in the Automotive, AEC-Q100 series.This results in a 18A output current.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Normal operation requires Vsup above 6V.It has a maximum input voltage of 32V volts.As a minimum input voltage, it requires 6V volts.
AUIR3314STRL Features
Supplied from 14V
Resistance of 9mOhm
AUIR3314STRL Applications
There are a lot of Infineon Technologies AUIR3314STRL Power Switches ICs applications.
- HDD, SSD
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- USB Protection
- Solid State Drivers
- Hard Disk Drives
- Portable GPS
- HDD and SSD
- USB3.1 Power Delivery
