AUIR3315
| Parameters | |
|---|---|
| Max Output Current | 14A |
| Voltage | 37V |
| Interface | On/Off |
| Current | 14A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 27 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 3.9A |
| Rise Time | 8μs |
| Fall Time (Typ) | 8 μs |
| Nominal Input Voltage | 32V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 15m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 16.51mm |
| Length | 10.67mm |
| Width | 4.83mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 15mOhm |
| Subcategory | Peripheral Drivers |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | AUIR3315 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
AUIR3315 Overview
The LED driver's packaged as a Tube.The TO-220-5 package contains it.This LED driving board is mounted using the mounting type Through Hole.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver has a total of 1 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is N-Channel volts.It belongs to the AUIR3315 family.There are 5 terminations in it.The operation is performed through the 5 pins.There are 1 functions of the LED driver.The maximum output current drops to 14A in order to meet the operation criteria.As long as the supply voltage is 14V, high efficiency can be achieved.The lighting driver is mounted in the direction of Through Hole.Currently, the LED driving board has a resistance of 15mOhm ohms.This electrical component can be found in the Automotive, AEC-Q100 series.The output current is set to 14A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.
AUIR3315 Features
Supplied from 14V
Resistance of 15mOhm
AUIR3315 Applications
There are a lot of Infineon Technologies AUIR3315 Power Switches ICs applications.
- Wireless Headsets
- Portable/Handheld Devices
- Wireless Modem Data Cards
- Notebook and Tablet Computers
- Portable Music Players
- Hot-Swap Systems
- USB Ports/Hubs
- Wireless/Networking Cards
- USB3.1 Power Delivery
- USB Power Distribution
