AUIR3315S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIR3315S |
| JESD-30 Code | R-PSSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 32V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 14A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 15m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 4.83mm |
| Width | 9.08mm |
| RoHS Status | RoHS Compliant |
AUIR3315S Overview
The package is in the form of a Tube.There is a package for it in the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.In this LED driver, there are no outputs available.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of N-Channel volts.I believe it belongs to the AUIR3315S family.A total of 5 terminations can be found in it.It has 1 functions.In terms of output, the lighting driver can provide a maximum of 14A V.As long as the supply voltage is 14V, high efficiency can be achieved.This electrical component is included in the Automotive, AEC-Q100 series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.A maximum supply voltage of 32V is set in Vsup.In order to operate normally, the supply voltage (Vsup) must be maintained above 6V.
AUIR3315S Features
Supplied from 14V
AUIR3315S Applications
There are a lot of Infineon Technologies AUIR3315S Power Switches ICs applications.
- USB Power Distribution
- PDAs
- Set-top-box
- PC Cards
- HDD, SSD
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Solid-State Drives
- Hot Swaps
- Mobile Communication Devices
