AUIR3315STRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Supplier Device Package | D2PAK |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 15mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Base Part Number | AUIR3315S |
| Number of Outputs | 1 |
| Output Voltage | 37V |
| Output Type | N-Channel |
| Max Output Current | 14A |
| Voltage | 37V |
| Interface | On/Off |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 6V |
| Current - Output (Max) | 14A |
| Nominal Supply Current | 3mA |
| Current | 14A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 14A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 11 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 32V |
| Output Current per Channel | 3.9A |
| Rise Time | 8μs |
| Fall Time (Typ) | 8 μs |
| Nominal Input Voltage | 32V |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~32V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Number of Drivers | 1 |
| Rds On (Typ) | 15mOhm |
| Max Junction Temperature (Tj) | 150°C |
| On-State Resistance | 15mOhm |
| Height | 5.084mm |
| Length | 10.67mm |
| Width | 11.33mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIR3315STRL Overview
It is packaged in the manner of a Tape & Reel (TR).Package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB contains it.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.There is a AUIR3315S family of things that it belongs to.5 pins are used for operation.Its maximum output voltage is 14AV.The maximum output current is reduced to 14A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.15mOhm resistance is present in the lighting driver.The Automotive, AEC-Q100 series includes this electrical component.This case results in a 14A output current.Its maximum input voltage is 32V volts.A minimum input voltage of 6V volts is required for this LED driver.For stable operation, the maximum operating temperature should be 150°C°C.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.It can handle a maximum voltage of 32VV.It can work with as low a supply voltage as feasible, such as 6VV.It has 1 drivers in the part.
AUIR3315STRL Features
Resistance of 15mOhm
AUIR3315STRL Applications
There are a lot of Infineon Technologies AUIR3315STRL Power Switches ICs applications.
- Portable Devices
- Telecom and Network Systems
- PDAs
- Various applications equipped with buttons
- Portable GPS
- PC Card Hot Swap
- Portable/Handheld Devices
- Portable Video Game Players
- HDD and SSD
- Notebook PC
