AUIR3316S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIR3316S |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 26V |
| Power Supplies | 6/26V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 23A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Turn On Time | 300 µs |
| Rds On (Typ) | 5.5m Ω |
| Turn Off Time | 350 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.084mm |
| Width | 9.08mm |
| RoHS Status | RoHS Compliant |
AUIR3316S Overview
As you can see, it's packaged in the way of a Tube.Package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB contains it.The lighting driver has the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.I believe it belongs to the AUIR3316S family.It has a total of 4 terminations.It is important to note that the LED driving board has 1 functions.Its maximum output voltage is 23AV.High efficiency is possible when the supply voltage is set to 14V.These electrical components are part of the Automotive, AEC-Q100 series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A maximum supply voltage of 26V is set in Vsup.A normal operation requires that the supply voltage (Vsup) remain above 6V.This part has a power supply of 6/26V volts.
AUIR3316S Features
Supplied from 14V
AUIR3316S Applications
There are a lot of Infineon Technologies AUIR3316S Power Switches ICs applications.
- USB3.1 Power Delivery
- USB Power Distribution
- Various applications equipped with buttons
- Hot Swaps
- Gaming
- PDAs
- Wireless Modem Data Cards
- USB Ports/Hubs
- Portable/Handheld Devices
- Wearable Devices
