banner_page

AUIR3316STRL

N-Channel PMIC Automotive, AEC-Q100 Series AUIR3316S 5 Pin 14V TO-263-5, D2Pak (4 Leads + Tab), TO-263BB


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIR3316STRL
  • Package: TO-263-5, D2Pak (4 Leads + Tab), TO-263BB
  • Datasheet: PDF
  • Stock: 867
  • Description: N-Channel PMIC Automotive, AEC-Q100 Series AUIR3316S 5 Pin 14V TO-263-5, D2Pak (4 Leads + Tab), TO-263BB (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-263-5, D2Pak (4 Leads + Tab), TO-263BB
Number of Pins 5
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2010
Series Automotive, AEC-Q100
JESD-609 Code e3
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 5.5mOhm
Terminal Finish Matte Tin (Sn) - with Nickel (Ni) barrier
Subcategory Peripheral Drivers
Power Rating 2W
Max Power Dissipation 2W
Terminal Position SINGLE
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 14V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AUIR3316S
JESD-30 Code R-PSSO-G4
Output Type N-Channel
Max Output Current 23A
Operating Supply Voltage 26V
Voltage 26V
Interface On/Off
Nominal Supply Current 1.5μA
Current 23A
Output Configuration High Side
Power Dissipation 2W
Output Current 7A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 300 μs
Switch Type General Purpose
Min Input Voltage 6V
Number of Inputs 1
Max Input Voltage 26V
Output Current per Channel 7A
Rise Time 80μs
Fall Time (Typ) 100 μs
Nominal Input Voltage 26V
Turn-Off Delay Time 350 μs
Ratio - Input:Output 1:1
Voltage - Load 6V~26V
Driver Number of Bits 1
Fault Protection Current Limiting (Adjustable), Over Temperature
Rds On (Typ) 5.5m Ω
Built-in Protections TRANSIENT; OVER CURRENT
Height 4.826mm
Length 10.668mm
Width 11.3mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

AUIR3316STRL Overview


The LED driver's packaged as a Tape & Reel (TR).It is included in the package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB.It has been mounted as Surface Mount on the LED driver.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is N-Channel volts.The AUIR3316S family consists of this type.It contains 4 terminations.The operation is performed through the 5 pins.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 23A.As long as the supply voltage is 14V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.The LED driver has 5.5mOhm resistance.This electrical component is included in the Automotive, AEC-Q100 series.When this case is used, the output current is set to 7A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.A supply voltage of 26V is recommended for maximum efficiency.As far as input voltage goes, its maximum is 26V volts.The input voltage minimum is 6V volts.It is equipped with 1 input.

AUIR3316STRL Features


Supplied from 14V
Resistance of 5.5mOhm

AUIR3316STRL Applications


There are a lot of Infineon Technologies AUIR3316STRL Power Switches ICs applications.

  • Notebook and Tablet Computers
  • Hot-Swap Systems
  • Mobile Communication Devices
  • Telecom and Network Systems
  • Set-Top Boxes
  • PC Card Hot Swap
  • USB Protection
  • Wireless/Networking Cards
  • Hard Disk Drives
  • Gaming

Write a review

Note: HTML is not translated!
    Bad           Good