Parameters |
Factory Lead Time |
1 Week |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
TO-220-5 |
Number of Pins |
5 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2010 |
Series |
Automotive, AEC-Q100 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
5.5mOhm |
Subcategory |
Peripheral Drivers |
Power Rating |
2W |
Max Power Dissipation |
2W |
Terminal Position |
SINGLE |
Number of Functions |
1 |
Supply Voltage |
14V |
Base Part Number |
AUIR3317 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
120A |
Voltage |
37V |
Interface |
On/Off |
Current |
23A |
Output Configuration |
High Side |
Power Dissipation |
2W |
Output Current |
23A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
300 μs |
Switch Type |
General Purpose |
Output Current per Channel |
7A |
Rise Time |
80μs |
Fall Time (Typ) |
100 μs |
Nominal Input Voltage |
26V |
Turn-Off Delay Time |
350 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
6V~26V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
5.5m Ω |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL |
Height |
16.51mm |
Length |
10.67mm |
Width |
4.83mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
AUIR3317 Overview
It is packaged in the form of a Tube.It's included in the TO-220-5 package.The LED driver is mounted as Through Hole.This switch is of type General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.It belongs to the AUIR3317 family.There are 5 terminations in it.The operation is performed through the 5 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current must drop to 120A to meet the operation criteria.Using a voltage of 14V allows for high efficiency.In this case, it is mounted in the way of Through Hole.The LED driver has 5.5mOhm resistance.A component of this type is included in the Automotive, AEC-Q100 series.The output current is set to 23A in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.
AUIR3317 Features
Supplied from 14V
Resistance of 5.5mOhm
AUIR3317 Applications
There are a lot of Infineon Technologies AUIR3317 Power Switches ICs applications.
- USB Power Distribution
- PC Cards
- Set-Top Boxes
- Hard Disk Drives
- Solid State Drivers
- Hot-Swap Systems
- Hot Swaps
- Portable Music Players
- Smartphone and PDA
- Various applications equipped with buttons