AUIR3317S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 5.5mOhm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIR3317S |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 7A |
| Voltage | 37V |
| Interface | On/Off |
| Current | 23A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 23A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Nominal Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 300 μs |
| Rds On (Typ) | 5.5m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 4.83mm |
| Length | 10.67mm |
| Width | 11.33mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIR3317S Overview
It's?packaged?in?the way?of?a?Tube.Package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB contains it.Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts.It comes under the family of AUIR3317S.It has a total of 4 terminations.It is necessary to use the 5 pins in order to operate the LED driver.It has 1 functions.As a result, the maximum output current is reduced to 7A in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 14V.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has 5.5mOhm resistance.It is included in the Automotive, AEC-Q100 series.As a result, the output current is set to 23A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.
AUIR3317S Features
Supplied from 14V
Resistance of 5.5mOhm
AUIR3317S Applications
There are a lot of Infineon Technologies AUIR3317S Power Switches ICs applications.
- USB Ports/Hubs
- USB Protection
- Storage Drives
- Various applications equipped with buttons
- USB Power Distribution
- Solid-State Drives
- Portable Music Players
- Hard Disk Drives
- Wearable Devices
- Gaming
