banner_page

AUIR3317STRL

6/26V N-Channel PMIC Automotive, AEC-Q100 Series AUIR3317S 5 Pin 14V TO-263-5, D2Pak (4 Leads + Tab), TO-263BB


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-AUIR3317STRL
  • Package: TO-263-5, D2Pak (4 Leads + Tab), TO-263BB
  • Datasheet: PDF
  • Stock: 375
  • Description: 6/26V N-Channel PMIC Automotive, AEC-Q100 Series AUIR3317S 5 Pin 14V TO-263-5, D2Pak (4 Leads + Tab), TO-263BB (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-263-5, D2Pak (4 Leads + Tab), TO-263BB
Number of Pins 5
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2011
Series Automotive, AEC-Q100
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 5.5mOhm
Terminal Finish Matte Tin (Sn) - with Nickel (Ni) barrier
Subcategory Peripheral Drivers
Max Power Dissipation 2W
Terminal Position SINGLE
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 14V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AUIR3317S
JESD-30 Code R-PSSO-G4
Number of Outputs 1
Output Type N-Channel
Max Output Current 120A
Supply Voltage-Max (Vsup) 26V
Power Supplies 6/26V
Supply Voltage-Min (Vsup) 6V
Interface On/Off
Output Configuration High Side
Output Current 23A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Output Current per Channel 7A
Ratio - Input:Output 1:1
Voltage - Load 6V~26V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature
Turn On Time 300 μs
Rds On (Typ) 5.5m Ω
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Height Seated (Max) 4.83mm
Width 9.08mm
Radiation Hardening No
RoHS Status RoHS Compliant

AUIR3317STRL Overview


Tape & Reel (TR) is how it's packaged.This file is included in package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is a member of the AUIR3317S family.It consists of 4 terminations in total.For operation, 5 pins are used.Currently, there are 1 functions associated with the lighting driver.Maximum output current falls to 120A when operation criteria are met.A supply voltage of 14V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.It has 5.5mOhm resistance.These electrical components are part of the Automotive, AEC-Q100 series.In this case, the output current is set to 23A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The lighting driver is configured to have a maximum supply voltage of 26V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 6V.This part has a power supply of 6/26V volts.

AUIR3317STRL Features


Supplied from 14V
Resistance of 5.5mOhm

AUIR3317STRL Applications


There are a lot of Infineon Technologies AUIR3317STRL Power Switches ICs applications.

  • Smart Phones, Feature Phones
  • Notebook and Tablet Computers
  • Notebook PC
  • Various applications equipped with buttons
  • Wireless Modem Data Cards
  • Solid-State Drives
  • Portable Devices
  • Hard Disk Drives
  • PC Card Hot Swap
  • Portable Video Game Players

Write a review

Note: HTML is not translated!
    Bad           Good