AUIR3320STRL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab) Variant |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 3.3mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Base Part Number | IR3320 |
| Number of Outputs | 1 |
| Output Voltage | 26V |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Current | 45A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 45A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 140 ns |
| Switch Type | General Purpose |
| Output Current per Channel | 45A |
| Rise Time | 100μs |
| Fall Time (Typ) | 100 μs |
| Nominal Input Voltage | 26V |
| Turn-Off Delay Time | 140 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Number of Drivers | 2 |
| Rds On (Typ) | 3.3m Ω |
| Height | 4.83mm |
| Length | 10.67mm |
| Width | 9.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIR3320STRL Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This file is included in package TO-263-5, D2Pak (4 Leads + Tab) Variant.In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The IR3320 family consists of this type.It has a total of 5 terminations.For operation, 5 pins are used.To meet the operation criteria, the maximum output current drops to 45A.As a result, it is mounted in the manner of Surface Mount.3.3mOhm resistance is present in the lighting driver.The Automotive, AEC-Q100 series includes this electrical component.The output current is set to 45A in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.There are 2 drivers associated with the part.
AUIR3320STRL Features
Resistance of 3.3mOhm
AUIR3320STRL Applications
There are a lot of Infineon Technologies AUIR3320STRL Power Switches ICs applications.
- Portable Music Players
- USB Protection
- Hot Swap
- USB Power Distribution
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Wireless/Networking Cards
- Wireless Headsets
- Hard Disk Drives
- PC Cards
