AUIR3330S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab) |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIR3330S |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Voltage | 36.3V |
| Interface | On/Off |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 2μA |
| Current | 45A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 45A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Rise Time | 1.3μs |
| Fall Time (Typ) | 650 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~18V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 3m Ω |
| Height | 4.83mm |
| Length | 10.67mm |
| Width | 11.33mm |
| RoHS Status | RoHS Compliant |
AUIR3330S Overview
The LED driver's packaged as a Tube.This package is included in TO-263-7, D2Pak (6 Leads + Tab).This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.I believe it belongs to the AUIR3330S family.It contains 6 terminations.In order to operate, the 7 pins are used.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 45A when operation criteria are met.Surface Mount is mounted in the way of this LED driving board.There is an electrical component included in the Automotive, AEC-Q100 series.In this case, the output current is set to 45A.This LED driving board uses an analog IC BRUSH DC MOTOR CONTROLLER.
AUIR3330S Features
AUIR3330S Applications
There are a lot of Infineon Technologies AUIR3330S Power Switches ICs applications.
- USB Ports/Hubs
- Mobile Communication Devices
- Hot Swap
- Low Voltage I/O System Power
- Portable Devices
- Portable GPS
- Smartphone and PDA
- Portable Video Game Players
- Portable Music Players
- Storage (HDDs, SSDs)
