AUIR33401S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab) |
| Number of Pins | 7 |
| Supplier Device Package | D2PAK (7-Lead) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 3mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Base Part Number | AUIR33401S |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 33A |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 33A |
| Current | 33A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 33A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Number of Inputs | 1 |
| Max Input Voltage | 18V |
| Output Current per Channel | 33A |
| Nominal Input Voltage | 18V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~18V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 3mOhm |
| Height | 4.826mm |
| Length | 10.668mm |
| Width | 11.3284mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
AUIR33401S Overview
As you can see, it's packaged in the way of a Tube.Package TO-263-7, D2Pak (6 Leads + Tab) contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the type of switch owned by it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.The AUIR33401S family consists of this type.It is necessary to use the 7 pins in order to operate the LED driver.In this case, the LED driving board can produce only 33AV as its maximum output.To meet the operation criteria, the maximum output current drops to 33A.Surface Mount is mounted in the way of this LED driving board.In this LED driving board, there is 3mOhm resistance.It belongs to the Automotive, AEC-Q100 series.In this case, the output current is set to 33A.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.This LED driving board can accept voltages up to 18V volts as an input.A minimum input voltage of 6V volts is required for this LED driver.For stable operation, the maximum operating temperature should be 150°C°C.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.1 inputs are available.
AUIR33401S Features
Resistance of 3mOhm
AUIR33401S Applications
There are a lot of Infineon Technologies AUIR33401S Power Switches ICs applications.
- Storage Drives
- Portable GPS
- Wireless Headsets
- PDAs
- Telecom and Network Systems
- PC Card Hot Swap
- Gaming
- Smartphone and PDA
- Hot Swap
- Storage (HDDs, SSDs)
