AUIRS2003S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIRS2003S |
| Max Output Current | 600mA |
| Power Supplies | 15V |
| Power Dissipation | 625mW |
| Output Current | 130mA |
| Propagation Delay | 820 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 60 ns |
| Rise Time | 170ns |
| Fall Time (Typ) | 90 ns |
| Turn-Off Delay Time | 60 ns |
| Rise / Fall Time (Typ) | 70ns 35ns |
| Interface IC Type | FULL BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 200V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
AUIRS2003S Overview
For greater flexibility, the 8-SOIC (0.154, 3.90mm Width) package is adopted.A packaging method of Tube is indicated.The configuration is supported by 2 drivers.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is 10V~20V it is able to demonstrate its superiority.This gate type has a IGBT, N-Channel MOSFET design.There is a temperature range for this device of -40°C~150°C TJ.Inverting, Non-Inverting is used as the input type in this program.It's configured with 8 terminations.There are various related parts under its base part number AUIRS2003S.Mosfet driver is mounted using the Surface Mount method.As a result, it is configured with 8 pins when it is designed.The device is specifically designed to operate at 15V volts.FULL BRIDGE BASED PERIPHERAL DRIVER is employed as its interface IC.There is a maximum output current of 600mA that can be achieved.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Ideally, the high-side voltage should not exceed 200V.Mosfet gate drivers supports a current output of 130mA.Using 625mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.Using its power supply of 15V, it provides solutions to diverse power supply problems.Among the Automotive, AEC-Q100 series, this gate driver is included.
AUIRS2003S Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 200V
Maximum power dissipation of 625mW
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS2003S Applications
There are a lot of Infineon Technologies AUIRS2003S gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Broadcast equipment
- Smart Phones
- PCMCIA applications
- Motor Drives
- UPS systems
- Welding
- Motor controllers
- serial peripheral interface (SPI), I2C
- Automotive Applications
