AUIRS2110S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIRS2110S |
| Max Output Current | 2.5A |
| Power Supplies | 15V |
| Power Dissipation | 1.25W |
| Output Current | 2.5A |
| Propagation Delay | 230 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 25ns 15ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Supply Voltage1-Nom | 15V |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.5A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 500V |
| Height | 2.35mm |
| Length | 10.4902mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIRS2110S Overview
The 16-SOIC (0.295, 7.50mm Width) package provides greater flexibility.Tube represents the packaging method.2 drivers are incorporated for its configuration.There is a mounting bracket in the way of Surface Mount.When the supply voltage is set to 3V~20V, it can demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.In this device, temperatures must not exceed -40°C~150°C TJ.This program uses the input type of Non-Inverting.Mosfet driver is based on 16 terminations.Numerous related parts are available for its base part number AUIRS2110S.In this case, Surface Mount indicates how the device is mounted.There are 16 pins available in the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.The maximum output current can amount to 2.5A.There are several useful electronic components found in its subcategory of Peripheral Drivers.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 500V.This device supports a current output of 2.5A at the output.The maximum power dissipation of 1.25W shows its maximum capability to transfer and conduct power loss without overheating.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.Gate drivers of this type are included in the Automotive, AEC-Q100 series.
AUIRS2110S Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 500V
Maximum power dissipation of 1.25W
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS2110S Applications
There are a lot of Infineon Technologies AUIRS2110S gate drivers applications.
- Broadcast equipment
- Smart Phones
- Commercial and agricultural vehicles (CAV)
- Motor controllers
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Supplies for controller area network (CAN),
- Video amplifiers
- serial peripheral interface (SPI), I2C
- Portable Media Players
- Portable Navigation Devices
