AUIRS2113STR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AUIRS2113S |
| Max Output Current | 2.5A |
| Power Supplies | 15V |
| Nominal Supply Current | 125μA |
| Power Dissipation | 1.25W |
| Output Current | 2.5A |
| Propagation Delay | 230 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 40ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 35 ns |
| Rise / Fall Time (Typ) | 25ns 15ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Supply Voltage1-Nom | 15V |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.5A 2.5A |
| Logic Voltage - VIL, VIH | 6V 9.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.35mm |
| Length | 10.4902mm |
| Width | 7.5946mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIRS2113STR Overview
Its 16-SOIC (0.295, 7.50mm Width) package is adopted for higher flexibility.A package of Tape & Reel (TR) has been used.Configuration is supported by 2 drivers.There is a mounting bracket in the way of Surface Mount.By using 10V~20V supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.In this device, temperatures must not exceed -40°C~150°C TJ.Non-Inverting is the input type used in this program.The configuration starts with 16 terminations.Many related parts can be found under its base part number AUIRS2113S.Devices are mounted by Surface Mount.A total of 16 pins are available on the device.Mosfet driver is designed specifically to run on 15V volts of power.In the maximum case, the output current can be 2.5A volts.Several electronic components are included in its subcategory of Peripheral Drivers.Ideally, the high-side voltage should not exceed 600V.The device is capable of delivering a current of 2.5A.This device has a maximum power dissipation of 1.25W, indicating that it is capable of reducing power loss without overheating.Due to its power supply of 15V, it provides an effective solution to power supply problems for a wide range of applications.A gate driver in the Automotive, AEC-Q100 series is included in this document.
AUIRS2113STR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.25W
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS2113STR Applications
There are a lot of Infineon Technologies AUIRS2113STR gate drivers applications.
- Multicolor LED/laser displays
- Line drivers
- 3-Phase Motor Inverter Driver
- Isolated Supplies for controller area network (CAN),
- LCD/LCoS/DLP portable and embedded pico projectors
- General Purpose 3-Phase Inverter
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Power factor correction (PFC) circuits
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- serial peripheral interface (SPI), I2C
