AUIRS21271S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1999 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 9V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AUIRS21271S |
| Max Output Current | 600mA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Propagation Delay | 275 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 275 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.275 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.275 μs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIRS21271S Overview
The 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tube represents the packaging method.Configuration is supported by 1 drivers.Its recommended mounting way is Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 9V~20V supply voltage.There is a gate type of IGBT, N-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.This program uses the input type of Non-Inverting.The configuration starts with 8 terminations.There are numerous related parts listed under its base part number AUIRS21271S.Mosfet driver is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.Mosfet driver is designed specifically to run on 15V volts of power.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.In the maximum case, the output current can be 600mA volts.This subcategory of MOSFET Drivers has a number of useful electronic components.The high-side voltage - Max (Bootstrap) can be up to 600V.Mosfet driver supports an output current of 290mA.625mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Among the Automotive, AEC-Q100 series, this gate driver is included.
AUIRS21271S Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS21271S Applications
There are a lot of Infineon Technologies AUIRS21271S gate drivers applications.
- Pulse transformer drivers
- General Purpose 3-Phase Inverter
- Motor controllers
- Telecom switch mode power supplies
- Industrial motor drives - compact, standard, premium, servo drives
- Commercial and agricultural vehicles (CAV)
- Uninterruptible Power Supplies (UPS)
- PCMCIA applications
- DC/DC converters
- Portable computers
