AUIRS21271STR
| Parameters | |
|---|---|
| Max Supply Current | 925μA |
| Propagation Delay | 275 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 275 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.275 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.275 μs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 9V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AUIRS21271S |
| Max Output Current | 600mA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
AUIRS21271STR Overview
Its 8-SOIC (0.154, 3.90mm Width) package provides greater flexibility.Tape & Reel (TR) represents the packaging method.1 drivers are incorporated for its configuration.Ideally, it should be mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 9V~20V.Gate type IGBT, N-Channel MOSFET has been used in its design.For this device, the temperature range is -40°C~150°C TJ.A type of Non-Inverting is used for input in this program.8 terminations constitute its foundation.There are various parts that can be found under its base part number AUIRS21271S.The device is mounted with Surface Mount.When designing, the device is configured with 8 pins.With a supply voltage of 15V, it is designed to operate.The interface IC of the device is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 600mA.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A high-side voltage can be set up to 600V (Bootstrap).This device is capable of delivering 290mA current.Considering its maximum power dissipation, 625mW shows its maximum capacity to transfer and conduct power loss without overheating.For higher stability, the supply current should be kept at 925μA.The gate driver belongs to the Automotive, AEC-Q100 series.
AUIRS21271STR Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS21271STR Applications
There are a lot of Infineon Technologies AUIRS21271STR gate drivers applications.
- 3-Phase Motor Inverter Driver
- Motor Controls
- Active filtering
- Motor Drives
- High power buffers
- Portable Navigation Devices
- High frequency line drivers
- Multicolor LED/laser displays
- Solar inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
