AUIRS21281S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 9V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AUIRS21281S |
| Max Output Current | 600mA |
| Power Dissipation | 625mW |
| Output Current | 290mA |
| Propagation Delay | 275 ns |
| Input Type | Inverting |
| Turn On Delay Time | 275 ns |
| Rise Time | 130ns |
| Fall Time (Typ) | 65 ns |
| Rise / Fall Time (Typ) | 80ns 40ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Turn On Time | 0.275 μs |
| Driven Configuration | High-Side |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 600mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.275 μs |
| Built-in Protections | OVER CURRENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
AUIRS21281S Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tube.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.Surface Mount is the way in which it is mounted.When the supply voltage is set to 9V~20V, it can demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.This device can operate at temperatures up to -40°C~150°C TJ.Input type of Inverting is used.Mosfet driver is based on 8 terminations.There are various related parts under its base part number AUIRS21281S.Mounting the device requires Surface Mount.In the device, there are 8 pins.A voltage of 15V is required for its operation.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.As a maximum, there is 600mA limit to the output current.There are various useful electronic components in its subcategory MOSFET Drivers.A high-side voltage can be set up to 600V (Bootstrap).An output current of 290mA is supported.Based on its maximum power dissipation of 625mW, it is clear that it is capable of transferring and conducting power loss without overheating.The gate driver is part of the Automotive, AEC-Q100 series.
AUIRS21281S Features
Embedded in the Tube package
1 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS21281S Applications
There are a lot of Infineon Technologies AUIRS21281S gate drivers applications.
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Solar inverters
- Uninterruptible Power Supplies (UPS)
- Portable Navigation Devices
- Broadcast equipment
- Motor Control
- High-speed communications
- Commercial and agricultural vehicles (CAV)
- AC-DC Inverters
- Industrial motor drives - compact, standard, premium, servo drives
