AUIRS2191STR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AUIRS2191S |
| Max Output Current | 3.5A |
| Power Supplies | 15V |
| Power Dissipation | 1W |
| Output Current | 3.5A |
| Propagation Delay | 175 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 25 ns |
| Rise Time | 60ns |
| Fall Time (Typ) | 60 ns |
| Turn-Off Delay Time | 25 ns |
| Rise / Fall Time (Typ) | 15ns 15ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.175 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3.5A 3.5A |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.175 μs |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 9.98mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIRS2191STR Overview
In order to increase flexibility, the package 16-SOIC (0.154, 3.90mm Width) is used.Tape & Reel (TR) represents the package.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Surface Mount is mounted in the way of the device.When the supply voltage is set to 10V~20V, it can demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.Temperature range -40°C~150°C TJ is allowed for this device.This program uses the input type of Non-Inverting.The configuration is based on 16 terminations.Under its base part number AUIRS2191S, various related parts can be found.You mount it with Surface Mount.During design, it is configured with 16 pins.The device is specifically designed to operate at 15V volts.In the maximum case, the output current can be limited to 3.5A.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of Peripheral Drivers.There can be a voltage up to 600V on the high-side (Bootstrap).Mosfet gate drivers supports a current output of 3.5A.Its maximum power dissipation of 1W shows its power loss capacity without overheating.With its 15V power supply, it provides power for diverse applications.In the Automotive, AEC-Q100 series, this gate driver is included.
AUIRS2191STR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
16 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1W
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS2191STR Applications
There are a lot of Infineon Technologies AUIRS2191STR gate drivers applications.
- Telecom switch mode power supplies
- General Purpose 3-Phase Inverter
- High power buffers
- Multicolor LED/laser displays
- Broadcast equipment
- Solar inverters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Isolated Gate Driver Supplies
- Portable computers
- Dual-Battery Systems
