AUIRS2301STR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AUIRS2301S |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Power Dissipation | 625mW |
| Output Current | 200mA |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 220 ns |
| Rise Time | 220ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 200 ns |
| Rise / Fall Time (Typ) | 130ns 50ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.3 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Built-in Protections | TRANSIENT; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIRS2301STR Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) is the packaging method.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is set to 5V~20V, it can demonstrate its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.The configuration starts with 8 terminations.There are various related parts under its base part number AUIRS2301S.Mosfet driver is mounted using the Surface Mount method.There are 8 pins available in the device.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.The maximum output current can amount to 350mA.Within this subcategory of Peripheral Drivers, there are several useful electronic components.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.200mA is the maximum output current supported by the device.Using 625mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.The power supply 15V of the product solves the power supply problem for a variety of applications.This gate driver belongs to the Automotive, AEC-Q100 series.
AUIRS2301STR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 625mW
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS2301STR Applications
There are a lot of Infineon Technologies AUIRS2301STR gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- Welding
- Portable Media Players
- serial peripheral interface (SPI), I2C
- Refrigerator
- Solar power supplies
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- UPS systems
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Uninterruptible Power Supplies (UPS)
